After Jiangmen clothing customization is completed, we need to start with the following aspects to check
thread is compatible with the fabric, including color, texture, fastness, shrinkage and other aspects. The color of the button should be the same as the color of the fabric. The product is regular, flat, folding rules, symmetrical left and right, all parts are flat ironed, no leaks, no dead wrinkles, no ends, no yarns and hairs, and all parts meet the standard requirements.
There are many types of fabrics. To ensure the appearance and robustness of the product, different stitch lengths should be selected for different fabrics. For example, the stitch length of hard fabrics can generally be thinner, and the stitch length of soft fabrics can be denser. Straight line means that the line of each sewing part is not allowed to bend at will, and it must meet the needs of the appearance of the garment; the line must be regular, not stacked, no skipped stitches, no throwing lines, clear and beautiful stitches, and the start and end of the sewing must be stitched Be strong, the length of the thread should be suitable, and there should be no missing stitches or missing threads. The elasticity of the stitches should be compatible with the thickness and texture of the fabric.
3, color difference
The color difference rule is the demand for materials, that is, the demand for clothes fabrics. According to relevant national regulations on color difference, the top collar, bag fabric, and side seams of trousers are the primary parts of clothing. The color difference is higher than Grade 4, and other surface parts are Grade 4. Grade 5 represents the best fastness to fading, and the color difference is equal to zero. Grade 4 to Grade 1 represents the relative increasing degree of fading, and Grade 1 indicates the most severe.
The size of custom-made clothing is the primary standard for checking the company's work clothes. Since it is tailor-made, it is naturally required to be more fit and comfortable than the tailors purchased in the shopping mall. It is suitable for the job requirements. It is particularly important to be loose and moderate.
Each independent part of the standard rules, only allow one defect, that is, there is a defect on the garment piece, and there must be no defect on the patch pocket and bag cover in this independent part. The types of defects are different for different fabrics. Punctuality must be done in accordance with norms and rules.