Sanshun Clothing CustomizationAfter completion, we need to check from the following aspects

1. Appearance

The line is compatible with the fabric, including color, texture, fastness, shrinkage, etc. The color of the buttons should be equal to the color of the fabric. The product is regular, flat, folded, symmetrical, ironing flat, no leakage, no dead fold, wireless head, no yarn wool, all parts meet the specification requirements.

2. Sewing

There are many kinds of fabrics. In order to ensure the appearance and robustness of the products, different fabrics should be selected with different needle spacing. For example, the stitch pitch of hard fabrics can generally be thinner, and the stitch pitch of soft fabrics can generally be denser. Straight lines mean that the lines of each sewing part are not allowed to bend at will and should meet the requirements of clothing appearance. The line should be regular, not stacked, without needle skipping or thread throwing, with clear and beautiful stitches, strong starting and stopping stitches, suitable length of tie-in thread, no needle leakage or thread disconnection, and the tightness of stitches should be adapted to the thickness and texture of the cloth.

3. Color difference

The color difference rule is the demand for materials, that is, the demand for clothes and fabrics. According to the rules of relevant national norms on color difference, the collar, bag fabric and pants side seams of clothing are the primary parts, the color difference is higher than level 4, and the other surface parts are level 4. Grade 5 represents the best fading fastness *, the color difference is equal to zero, grade 4 to grade 1 represents the degree of relative increase in fading, and grade 1 indicates the most severe.

4. Dimensions

The size of clothing customization is the primary standard for the company to check overalls. Since it is customized according to quantity, it is naturally required to be more suitable than tailors purchased in shopping malls. It is comfortable to wear and suitable for job needs. It is especially important to be loose and moderate.

5. Defects

It is standardized that only one defect is allowed for each independent part, that is to say, there is a defect on the garment piece, and no defect is allowed on the patch bag and cover in this independent part. The types of defects are different for different fabrics. Sentencing shall be carried out in accordance with the rules and regulations.

Article from: Sanshun clothing customhttp://www.samsunclothing.com/