At present, the waterproof function of most assault clothing products on the market comes from the coating on the surface of the fabric. With the increase of washing times, the coating may gradually fall off or dissolve, and the waterproof effect of the charge clothing will also decrease. Sanshun clothing customization teaches you how to deal with the problem that the waterproof effect of charge clothes decreases due to washability.

Is the charge clothing not washable? Waterproof effect drops?

Charge clothes are generally made of chemical fiber fabrics (polyester, nylon, etc.), which will age for a long time. After repeated washing, it is normal for the waterproof effect to decline.

First of all to understand the principle of waterproof clothing

1. Outside water-repellent coating/water-repellent treatment (using waterproofing agent to obtain waterproofing effect), this situation can be treated with waterproofing agent with excellent waterproofing effect and durable washing function, for example, Texnology?FCB058 carbon six three waterproofing agent can still reach 100 points after 30 times of washing on polyester fabric, and has excellent waterproofing effect and washing resistance. It is a good waterproofing agent for storm clothes.

2. Outer anti-splashing water coating/anti-splashing water treatment center waterproof and breathable film

Therefore, in the case of broken sweeping clothes, when the waterproof effect decreases:

1. If a few drops of water are sprinkled on the jacket, the water cannot form water droplets on the surface of the jacket. First, it can be determined that it is caused by the aging failure of the water-repellent coating/water-repellent treatment. If this is the case, apply water-repellent wax or spray water-repellent treatment liquid;

2. Perhaps it is due to the aging failure of anti-splash coating/anti-splash water treatment, or it may be due to the aging failure of the central waterproof and breathable film. In general, the central waterproof breathable film will only (due to the blocking of the ventilation holes) reduce the permeability, and rarely show a decline in waterproof function.

However, once it is useless to apply water-repellent wax or spray water-repellent treatment liquid, it is determined that the problem is the central waterproof and breathable film, the location of the water leakage is determined, and the water-repellent adhesive tape is applied to deal with it.

Article from: Sanshun clothing customhttp://www.samsunclothing.com