To check the quality of clothing, the first thing to do is to measure the length, chest circumference, collar sleeve length, shoulder width, trousers length, hip circumference and waist circumference according to the type marked on the clothing to see if the scale specification is accurate, and the fault should generally be less than 1.5 per cent. After checking the specification, the key point is to check the connotation quality of the clothing. The method is visual inspection, ruler measurement and strict check. It is best to make a visual inspection when trying it on.

(1) jacket: from the front, back, around the surface inspection. In front, check whether the two sharp corners of the collar are symmetrical, do not have unevenness or inclination, and should be straight, the size of the collar should be close to the neck, and the collar should not be exposed. Whether the pocket position is symmetrical, whether the shoulder blade is wide and comfortable, whether the back fork is flat, and the surrounding surface mainly depends on whether the shoulder seam is straight, whether the clothes and sleeves are round and even, and there is no unevenness or collapse. Then look at whether the sleeves are common to the front and back, and whether the swing seams are straight and flat.

(2) pants: can be divided into plane, upper, three-dimensional three-step inspection. Plane inspection, choose to align the seams, spread them out, see if the seams are straight and not cracked, if the side seams are flat, if the bag pad is not exposed, if the trouser legs are fit, if the size is the same, and if the bag is not cracked. Pull up another trouser leg to see if the lower seam is aligned, straight, not cracked, whether the intersection with the back seam is straight, whether the lower seam of the trouser leg is aligned, straight, not cracked, whether the intersection with the back seam is straight, and whether the lower seam of the trouser leg is hung up. Check the upper part, mainly to see whether the waist head is straight, not fat or tight, whether the tuck and seam are symmetrical, whether the back bag is conformable and flat, whether the small skirt of the string is flat, whether the orientation is accurate, whether the cooperation between the placket and the inside skirt is qualified and round; Whether the zipper is sensitive; During the three-dimensional inspection, pick up the waistband according to the wearing shape to see if the front and rear seams are round and rear seams and four squares, whether the trousers and seams are smooth and not cracked.

(3) fabric inspection: to see if there are any obvious defects, color difference, moth-eaten, rat bite, etc. If so, it does not meet the quality requirements.

Article from: Sanshun clothing customhttp://www.samsunclothing.com/