How to clean clothes without destroying the waterproof layer
Release time:2020-12-24
Charge clothing is a functional clothing with various functions such as windproof, waterproof and breathable. It is different from ordinary clothes in washing method. Incorrect washing method will seriously damage the waterproof function of clothes. In this sense, correcting the wrong washing method is equivalent to buying a new dress.
Partial Cleaning
First of all, when wearing, pay attention to try not to touch oil stains and difficult to clean the material, reduce the number of cleaning, to prevent excessive damage to the film. If one part of the clothes is infected with stains, the stains can be partially cleaned to avoid infection to other parts and affect the beauty of the whole. recommend the use of universal foam cleaning agent, before the use of full shake, and then in the interval stains about 20CM of the orientation of the foam evenly sprayed on the surface of the clothes, waiting for 30 to 50 seconds, with cotton cloth quietly scrub the surface of the stains.
Wash the whole dress
In the manufacturing process, in order to ensure waterproof, breathable and windproof functions, various coatings or films are used on the fabric of the charge clothes. The films will not be naturally damaged, but excessive external force and corrosive substances will damage the films. Therefore, the charge clothes cannot be dry-cleaned or machine-washed, and generally can only be washed by hand with water of about 40 degrees (do not use hot water).
First of all, the clothing is completely soaked, and then with a sponge or cotton cloth directly dipped in the right amount of detergent scrub clothing surface, it is necessary to use neutral detergent (we use in daily life shampoo and detergent are neutral), do not use bleach and softener. Simply rub and rinse until clear.
Water-repellent maintenance
If the original waterproof and breathable charge clothes are to still adhere to the original water-repellent effect, TX.Direct and Wash-in [washing waterproof clothing waterproof agent] should be used for maintenance: put the wet clothes just now into clear water (no need to dry, just put them in directly), then pour 50 ml TX.Direct (suitable for two pieces of clothes), soak them for 20 minutes, then rinse them with cold water until clear.
drying
Do not twist hard after cleaning, hang on a hanger in a ventilated local extension and drain. Prevent sun exposure and do not use a dryer.
Effect after washing
After washing the clothes clean as before, prevent water splashing after maintenance.
Article from: Sanshun clothing customhttp://www.samsunclothing.com/