The waterproof function of most assault clothing products on the market now comes from the coating on the surface of the fabric. With the addition of washing times, the coating may gradually fall off or dissolve, and the waterproof effect of the jacket will also decrease.Three obedienceCustomTeach you how to deal with the problem that the waterproof effect of the charge clothes is not washable.

Charge clothes are generally made of chemical fiber fabrics (polyester, nylon, etc.), which will age in a long time dimension. It is normal for the waterproof effect to decrease through repeated washing.

First to understand the principle of waterproof clothing

1. Outside water-repellent coating/water-repellent treatment (using waterproofing agent to obtain waterproofing effect), this situation can be treated with waterproofing agent with excellent waterproofing effect and durable washing function, for example, Texnology?FCB058 carbon six three waterproofing agent can still reach 100 points after 30 times of washing on polyester fabric. It has excellent waterproofing effect and washability function and is a good waterproofing agent for storm clothes.

2. Outer anti-splashing water coating/anti-splashing water treatment middle waterproof breathable film

Therefore, in the case of sweeping clothes break, when the waterproof effect decreases:

1. If a few drops of water are sprinkled on the jacket, the water cannot form water droplets on the surface of the jacket. First, it can be concluded that it is caused by the aging failure of the water-repellent coating/water-repellent treatment. If this is the case, the water-repellent treatment liquid may be sprayed by applying water-repellent wax;

2. Perhaps it is caused by the aging failure of water repellent coating/water repellent treatment, or it may be caused by the aging failure of the intermediate waterproof and breathable film. Under normal circumstances, the middle waterproof breathable film will only (because the ventilation hole blocking) permeability decreased, rarely show a decline in waterproof function.

However, once the anti-splash wax or spray anti-splash treatment liquid is a drop in the bucket, then confirm that it is the problem of the middle waterproof and breathable film, confirm the location of the water leakage, and deal with it by replenishing the waterproof adhesive tape.

Article from: Sanshun clothing customhttp://www.samsunclothing.com/